How to Manually Close a Garage Door without Power?

If your garage door has lost power or you are having trouble opening it with a remote control, there is a way to manually close the door. This article outlines how to safely and securely close a garage door without power. You can contact an experienced garage door opener repair Suffolk technician if you don’t want to do it yourself.

Following these steps will ensure that your home and car remain safe and secure in the event of an emergency.


The first step is to locate the manual release cord, usually a red cord hanging from the center of your garage door. It should be connected to a lever on the opener rail near the bottom of the garage door. Using this lever, you can disconnect the power source from the garage door opener by pulling on it gently until it releases.

Once the power source is disconnected, you should be able to manually open and close the door. To do this, you will need to find two handles on the back of your garage door. These are usually located at the top corners of the door, near where the track is attached. Pulling one or both of these handles will manually open the door.

When closing the door, lift it from the center with both hands and guide it down until it is fully closed. Once the door is closed, be sure to press firmly on the middle of the garage door to ensure that it has made contact with the floor at all points. You may need to lift the handle again and press down on the door a few times for it to make proper contact with the floor.

Lastly, after manually closing the garage door, you should reattach the manual release cord to ensure that your garage door will open again when power is restored.

Social Links: Servicenow, Evernote, Delphiforums, Minecraftcommand, Visual